Specifications
Pick-up Device : 1/2" interline transfer CCD
Picture Elements (Pixels) : PAL/CCIR 438K (752Hx582V) , NTSC/EIA 380K (768Hx494V)
Horizontal Resolution : 580TVL (B/W)
Vertical Resolution TVL : 440 (PAL/CCIR); 375 (NTSC/EIA)
50% Amplitude Response : Greater than 470TVL (B/W)
Scanning System : 625/525 lines 50/59.94 vertical fields
Sync System : 2:1 interlaced EIA (RS 170) or CCIR
Usable Sensitivity-B/W : > than 0.03 Lux
Auto White Balance : Via lens/image signal (w/o IR cut filter) over 1200nm
Infra-red spectrum: up to 1050nm
S/N (AGC off 1~2Lux) : > than 58dB
AGC Gain : Up to 32dB
Video Output : 1.0V p-p/75Ω
Ext. Sync : 8V p-p via the video coax cable
I-D-CODE: 16 bit code transmitted during singlehorizontal line (H12±1) of every field.
Lens System : 3mm; F1.4, 4mm; F1.4, 4.4mm;F1.4, 6mm; F1.4, 8mm; F1.4,10mm;F1.4, vari focal 6~12mm; F1.6, 12.5~25mm; F1.6 auto iris with ND and IR cut or LPF filter
Auto Iris Delay Time : Less than 2 sec.
Power via coax : 185mA regulated current , supplied by EP/C100 power supply (use EX600 models)
Operating Voltage : 12V ~ 24V DC/AC (non-polar)
Current Consumption : 250mA (no heater); 370mA (with heater)
AC Power Operation : 120V - 230V AC 50/60Hz 3.5W (no heater), 6W (with heater) (use EX680 models)
Video & Power Connectors : Terminals
Ambient Temperature : -20° C to + 50° C (operating range)
Dimensions : Refer to the illustrations
Specifications and dimensions subject to change without notice. |